Windows XP Windows 7 Windows 2003 Windows Vista Windows教程綜合 Linux 系統教程
Windows 10 Windows 8 Windows 2008 Windows NT Windows Server 電腦軟件教程
 Windows教程網 >> Linux系統教程 >> Linux教程 >> Linux系統下Lighttpd的安裝配置

Linux系統下Lighttpd的安裝配置

日期:2017/2/7 16:58:25      編輯:Linux教程
lighttpd(http://lighttpd.net/)和apache一樣是開源的,與apache相比,雖然功能不及apache完善,穩定性也不如apache,但是,不管是服務靜態頁面,還是服務動態內容(CGI,PHP),它都比apache快,用於ad banner之類的WEB服務器是最恰當不過了。

本文從應用的角度,說明如何安裝、配置lighttpd。

(1) 安裝

可從http://lighttpd.net/download/下載最新的源碼(.tar.gz)或者rpm包。如果下載的是.tar.gz文件,則和GNU的其他軟件一樣,先./configure一下,然後 make && make install就搞定了。但是如果你想定制一些功能,就得好好看看解壓後README, INSTALL以及./configure --help的輸出結果了。這裡僅僅說一下如何從源碼安裝,其他安裝方式可參考 http://trac.lighttpd.net/trac/wiki/TutorialInstallation。

$ gzip -cd lighttpd-1.4.9.tar.gz   tar xf -
...
$ cd lighttpd-1.4.9
$ ./configure --help
`configure' configures lighttpd 1.4.9 to adapt to many kinds of systems.

Usage: ./configure [OPTION]... [VAR=VALUE]...

To assign environment variables (e.g., CC, CFLAGS...), specify them as
VAR=VALUE. See below for descriptions of some of the useful variables.

Defaults for the options are specified in brackets.

Configuration:
...

Installation directories:
--prefix=PREFIX install architecture-independent files in PREFIX
[/usr/local]
--exec-prefix=EPREFIX install architecture-dependent files in EPREFIX
[PREFIX]

By default, `make install' will install all the files in
`/usr/local/bin', `/usr/local/lib' etc. You can specify
an installation prefix other than `/usr/local' using `--prefix',
for instance `--prefix=$HOME'.

For better control, use the options below.

Fine tuning of the installation directories:
...

Program names:
...

System types:
...

Optional Features:
--disable-FEATURE do not include FEATURE (same as --enable-FEATURE=no)
--enable-FEATURE[=ARG] include FEATURE [ARG=yes]
--enable-maintainer-mode enable make rules and dependencies not useful
(and sometimes confusing) to the casual installer
--disable-dependency-tracking speeds up one-time build
--enable-dependency-tracking do not reject slow dependency extractors
--enable-static[=PKGS]
build static libraries [default=no]
--enable-shared[=PKGS]
build shared libraries [default=yes]
--enable-fast-install[=PKGS]
optimize for fast installation [default=yes]
--disable-libtool-lock avoid locking (might break parallel builds)
--enable-lfs Turn on Large File System (default)
--disable-ipv6 disable IPv6 support

Optional Packages:
--with-PACKAGE[=ARG] use PACKAGE [ARG=yes]
--without-PACKAGE do not use PACKAGE (same as --with-PACKAGE=no)
--with-gnu-ld assume the C compiler uses GNU ld [default=no]
--with-pic try to use only PIC/non-PIC objects [default=use
both]
--with-tags[=TAGS]
include additional configurations [automatic]
--with-mysql[=PATH]
Include MySQL support. PATH is the path to
'mysql_config'
--with-ldap enable LDAP support
--with-attr enable extended attribute support
--with-valgrind enable internal support for valgrind
--with-openssl[=DIR]
Include openssl support (default no)
--with-openssl-includes=DIR
OpenSSL includes
--with-openssl-libs=DIR OpenSSL libraries
--with-kerberos5 use Kerberos5 support with OpenSSL
--with-pcre Enable pcre support (default yes)
--with-bzip2 Enable bzip2 support for mod_compress
--with-fam fam/gamin for reducing number of stat() calls
--with-webdav-props properties in mod_webdav
--with-gdbm gdbm storage for mod_trigger_b4_dl
--with-memcache memcached storage for mod_trigger_b4_dl
--with-lua lua engine for mod_cml

Some influential environment variables:
...
如上所述,可通過--prefix指定安裝路徑,默認安裝在/usr/local下。可以指定啟用哪些特征(插件),禁用哪些特征(插件)。假定我們要把lighttpd安裝到/usr/local/lighttpd-1.4.9下面。

$ ./configure --prefix=/usr/local/lighttpd-1.4.9
$ make
$ make install
$ cp doc/lighttpd.conf /usr/local/lighttpd-1.4.9/ # 拷貝配置文件
$ cd /usr/local/lighttpd-1.4.9
$ vi lighttpd.conf # 修改配置文件
配置文件很直觀明了,一般只要把server.document-root、server.errorlog、accesslog.filename改成你的實際目錄和文件名字就可以了。

$ sbin/lighttpd -f lighttpd.conf # 啟動lighttpd服務
$ ps aux   grep lighttpd
www 15403 0.0 0.9 2860 1148 ? S 00:15 0:00 sbin/lighttpd -f
這就完成了從安裝到啟動的整個過程,很簡單吧。從最後一行的輸出可以看出,lighttpd是單進程服務的,這和apache不一樣(也許是它的穩定性不如apache的一個原因)。
(2) 整合php和fastcgi

以php-4.3.11為例,編譯PHP的時候,不能指定 --with-apxs選項,編譯命令行大致如下:

$ ./configure ... --enable-force-cgi-redirect --enable-fastcgi
$ make
$ sapi/cgi/php -v
PHP 4.3.11 (cgi-fcgi) (built: Jan 30 2006 00:12:34)
Copyright (c) 1997-2004 The PHP Group
Zend Engine v1.3.0, Copyright (c) 1998-2004 Zend Technologies
make完了後,會在sapi/cli目錄生成命令行下的php程序,sapi/cgi下生成fastcgi下的php程序。如果執行sapi/cgi下的php顯示版本號,你會發現有 cgi-fcgi的說明,這就表明你成功了。

$ mkdir /usr/local/lighttpd-1.4.9/fcgi
$ cp sapi/cgi/php /usr/local/lighttpd-1.4.9/fcgi/
$ vi /usr/local/lighttpd-1.4.9/lighttpd.conf
我們建立一個子目錄fcgi用來保存所有的fast-cgi程序,然後把php拷貝到該目錄下。編輯lighttpd.conf,如下所示:

...
server.modules = (
...
"mod_fastcgi",
...)
...
fastcgi.server = (".php" =>
( "127.0.0.1" =>
(
"socket" => "/tmp/fcgi_php.sock",
"bin-path" => "/usr/local/lighttpd-1.4.9/fcgi/php"
)
)
)
重新啟動lighttpd就可以了。Lighttpd和fastcgi通信有兩種方式:通過Unix socket通信,如以上PHP的啟動;通過TCP/IP socket通信。Lighttpd支持基於fastcgi的負載均衡,不過我沒嘗試過。

關於fastcgi的協議規范,請參考http://www.fastcgi.com/,以下是我自己寫的一個fastcgi的配置樣例:

fastcgi.server = ( "/fastcgi/adsim" =>
( "127.0.0.1" =>
(
"host" => "127.0.0.1",
"port" => 4000,
"bin-path" => "/usr/local/lighttpd-1.4.9/fcgi/adsim",
"check-local" => "disable"
)
)
check-local必須設置為disable,否則因為找不到/fastcgi/adsim會導致請求失敗。

(3) 制作lighttpd啟動腳本

每次啟動lighttpd時我們要指定配置文件的位置,停止lighttpd時要先找到進程號,然後用kill發送停止信號,有點太麻煩了。好在lighttpd自帶了一個腳本程序能輔助完成這些操作,只要稍微改改就能用了,那就是源碼目錄doc/rc.lighttpd和doc/rc.lighttpd.redhat,後者專用於RedHat Linux。主要的改動之處在於:

...
if [ -z "$LIGHTTPD_CONF_PATH" ]; then
LIGHTTPD_CONF_PATH="/usr/local/lighttpd-1.4.9/lighttpd.conf"
fi
...
lighttpd="/usr/local/lighttpd-1.4.9/usr/sbin/lighttpd"
...
用這個腳本管理lighttpd是不是方便多了。

(4) Lighttpd和OpenSSL

Lighttpd默認不編譯ssl模塊,所以必須在編譯的時候明確指定 --with-openssl,然後再生成自簽署的服務器證書或者從CA那裡獲取。生成自簽署證書的方法如下:

$ openssl req -new -x509 -keyout server.pem \
-out server.pem -days 365 -nodes
Lighttpd要求證書和私匙保存在同一個文件裡,如果是分開的,則需要合並:

$ cat host.key host.crt > host.pem
配置lighttpd.conf,大致樣子如下:

ssl.engine = "enable"
ssl.pemfile = "server.pem"
你可以針對某個虛擬主機做這樣的設置,但是由於SSL工作在TCP層,所以不能設置基於名稱的虛擬主機,只能設置基於端口的。 以下是一個配置樣例:

$SERVER["socket"] == "192.168.146.128:443" {
ssl.engine = "enable"
ssl.pemfile = "/usr/local/lighttpd/certs/server.pem"
server.document-root = "/home/www/wfs/www"
}

(5) 配置目錄列表

修改 lighttpd.conf,大致如下所示:

server.module = {
...
"mod_dirlisting",
...}

dir-listing.activate = "enable"

(6) 配置CGI

修改lighttpd.conf,首先需要啟動mod_cgi,然後在static-file.exclude-extensions中指定cgi文件的擴展名,最後通過cgi.assign配置指令進行關聯。

對於帶擴展名且需要特定解析程序執行的CGI,可以指定解析程序的路徑,比如:

cgi.assign = ( ".pl" => "/usr/bin/perl",
".cgi" => "/usr/bin/perl" )
對於帶擴展名切不需要特定解析程序就能執行的CGI,可指定解析程序為空,比如:

cgi.assign = (".cgi" => "")
對於不帶擴展名的CGI程序,只能通過固定路徑存取了,比如:

cgi.assgin = ( "/cgi-bin/mycgi" => "/usr/local/cgi/mycgi )

(7) 配置虛擬主機

配置基於端口的虛擬主機上文有所描述,基於名稱的虛擬主機也很簡單。修改lighttpd.conf,啟動模塊mod_simple_vhost,然後指定你的虛擬主機信息,比如:

$HTTP["host"] == "news.example.org" {
server.document-root = "/var/www/servers/news2.example.org/pages/"
}
Lighttpd注重於速度,而Apache注重於穩定性和功能,怎麼選擇還得看具體的應用。
Copyright © Windows教程網 All Rights Reserved